Introduction to various shelves

According to the development of shelves, shelves can be divided into traditional shelves and new types of shelves. Traditional shelves include: layer shelves, layer format shelves, drawer shelves, cabinet shelves, U-shaped shelves, cantilever shelves, grid shelves, saddle shelves, gas cylinder steel tube shelves, tire specific shelves, etc. New types of shelves include: rotating shelves, mobile shelves, prefabricated shelves, adjustable shelves, pallet shelves, in car shelves, high-rise shelves, attic shelves, gravity shelves, screen mounted shelves, etc.

Shelves can be divided into general shelves and specialized shelves based on their applicability. According to the manufacturing materials of the shelves, they are divided into steel shelves, reinforced concrete shelves, steel and reinforced concrete mixed shelves, wooden shelves, steel wood composite shelves, etc. According to the degree of closure of the shelves, they can be divided into open shelves, semi closed shelves, closed shelves, etc. Layered shelves, layer grid shelves, cabinet shelves, drawer shelves, cantilever shelves, triangular shelves, grid shelves, etc. based on structural characteristics. According to the mobility of the shelves, they can be divided into fixed shelves, mobile shelves, rotating shelves, combination shelves, adjustable shelves, and mobile storage shelves. According to the structure of the shelves, they are divided into integral structural types, with the shelves directly supporting the warehouse roof and surrounding areas, and separate structural types. The shelves and buildings are divided into two independent systems.

According to the loading method of the shelves, they can be divided into cantilever shelves, cabinet shelves, and shed panel shelves. According to the structure of the shelves, light warehouse shelves can be divided into detachable shelves and fixed shelves. It is further divided into modular shelves, general shelves, mobile shelves, and through shelves. Classified by shelf height: Low level shelves: height below 5 meters; Middle shelf: height between 5-15 meters; High rise shelves: with a height of over 15 meters. Classified by shelf weight: Heavy duty shelves: Each layer of shelves has a load capacity of over 500 kilograms; Medium sized shelves: Each layer of shelves (or shelves) can carry a weight of 150-500 kilograms; Lightweight shelving: Each layer of shelving has a load capacity of less than 150 kilograms.

The heavy-duty pallet shelves are made of high-quality cold-rolled steel plates that are rolled and formed. The columns can reach up to 6 meters without joints in the middle. The crossbeam is made of high-quality square steel, which has a high load-bearing capacity and is not easily deformed. The hanging parts between the crossbeam and the column are cylindrical protrusions inserted, which are reliable and easy to disassemble. Lock nails are also used to prevent the crossbeam from being lifted by forklifts during operation; All shelves are treated with acid pickling, phosphating, electrostatic spraying and other processes to prevent corrosion and rust, and have a beautiful appearance. Suitable for large warehouses.

Medium sized shelves: Medium sized shelves have unique shapes, reasonable structures, easy assembly and disassembly, no need for screws, and are sturdy and strong with high load-bearing capacity. They are widely used in shopping malls, supermarkets, enterprise warehouses, and public institutions.

Lightweight shelving: Lightweight perforated shelving is a highly versatile structural system that can be widely used for assembling lightweight shelves, workbenches, tool carts, suspension systems, safety nets, and support frames. The length of punched angle steel can be quickly cut according to the scale, assembled, corrected and reinstalled with screws, so that it can meet both carefully planned use and emergency needs.

Attic style shelving: a fully modular structure that can be made of materials such as wooden boards, patterned boards, steel plates, etc. for floor slabs. It can be flexibly designed into two or more floors and is suitable for hardware tools. Small packaging and loose storage of electronic equipment, mechanical parts, and other items, storing multiple varieties and small batches of goods to fully utilize space.

Industry standard for storage shelves

The lack of unified standards in production and use in China's warehousing and shelving industry has affected its development. To address this issue, 6 shelving industry standards have been officially approved, and 2 national standards are ready for public announcement and approval. At this meeting, Hubei Institute of Material Circulation Technology introduced the development and main contents of four logistics industry standards jointly formulated by the institute and relevant enterprises, including "Shelf Terminology", "Shelf Classification and Code", "Design Specification for Warehouse Mobile Shelves", and "Production Management Requirements for Warehouse Shelves"; Shanghai Guobao Logistics System Engineering Co., Ltd. introduced the development and main contents of two industry standards, "pallet shelves" and "through type shelves"; Some shelf companies in Nanjing have introduced the application status and preparation plans of two national standards, "Design and Calculation of Composite Industrial Shelves" and "Specification and Rated Weight Load of Industrial Shelves", which have been publicly announced. The attending units also discussed the current situation, problems, and future directions of the shelving industry standard work. It is a gratifying phenomenon that shelf production enterprises hold meetings to discuss standards and undertake standard formulation, indicating that they attach great importance to standard work; In the process of standard preparation, the following issues need to be addressed: firstly, we need to focus on a few basic things. For shelf standards, there are two fundamental issues: one is size, and the other is the balance between quality and cost, which should run through the "soul" of the entire shelf standard. Any standard should have a basic structure, not too large, and the concept extraction should be appropriate. Its position in the entire standard system should be clear, and the basic concepts should be simplified rather than complicated when formulating standards, because standards are a summary and refinement of mature technologies; Secondly, we should try our best to learn and draw on international standards, using the framework of international standards as our own framework, and studying their concepts and methods; The third is to strengthen the collection of basic data, enhance investigation and research, especially quantitative standards, and pay more attention to the study of classic cases.

warehouse shelf

The warehouse shelves have a high load-bearing capacity, with each layer carrying up to 4500kg. They are fast and convenient to access, making them the most widely used pallet storage system with strong versatility. Its structure is that the shelves are divided into several rows along the width of the warehouse, leaving a passage for stacking cranes, forklifts, or other handling machinery to pass through. Each row of shelves is divided into several columns along the longitudinal direction of the warehouse, and vertically into several layers, forming a large number of storage spaces for pallet storage of goods. Each pallet can be independently stored or moved, and warehouse shelves make the loading and unloading process of goods easier and faster. It can adapt to various types of goods, adjust the height of the crossbeam according to the size requirements of the goods, and make the most of the upper space of the warehouse. The supporting facilities are the simplest, with the lowest cost, and installation and removal are extremely convenient. The warehouse shelves are made of high-quality steel plates, and the surface is treated with electrostatic spraying, which is anti-corrosion/rust proof/sturdy and beautiful. Its various specifications and load-bearing design can meet the usage requirements of factories, warehouses, assembly lines, and storage supermarkets. When you need shelves with a load-bearing capacity of 100-150kg per layer, this type of shelf is an ideal choice and can also be used as a platform. Therefore, lightweight shelves are suitable for storing lightweight loose items in factories and for use in warehouses and supermarkets. The plug-in assembly method is easy to install and disassemble, and has a wide range of uses. The steel plate can be adjusted up and down freely to meet various usage requirements.

Clothing shelves

The clothing boutique shelf is made of lightweight and high-strength aluminum titanium alloy compression molding. The clothing boutique shelf is assembled from columns, beams, glass, specialized connectors, etc. It has the characteristics of flexible assembly, convenient transportation, high-end beauty, and durability; Clothing boutique shelves can be customized into various styles according to the actual venue and personal preferences. Clothing boutique shelves are free of decoration waste, decoration noise, decoration pollution, fast and convenient, and are very environmentally friendly. Clothing boutique shelves have a good decorative effect, and are particularly suitable for sample display halls of foreign trade companies, brand product specialty stores, boutique shopping centers, etc. Clothing boutique shelves can provide the most perfect setting display for products.